Giant Red Pirate Ship Inflatable Slides Pirate Boat Design For Kids
What’s your material?
We have a large range of inflatables and variety of material for
your choose, We normally use 1000D 0.55mm/0.5mm PVC or 15oz PVC
Tarpaulin for inflatable sewing game, 8oz superflex material or PVC
coated nylon for advertising inflatables, 0.6mm/0.9mm pvc tarpaulin
for sealed water games,0.5mm/0/6mm PVC tarpaulin for sealed tents.
We will suggest you the correct material for the right product and
we can meet your desire on material.
Our regular producing time for 1pc inflatables is 3~7 days, and
20~30 days for container order. It can be +/- depending on the
design and the dimensions.
We can offer different kinds of CE/UL blowers for different market.
They’re in different power and plug.
Regarding Install and Setup of Inflatables
1). please check the working place is even and smooth without sharp
and keen points before using the inflatables;
2). Position on a level ground area.
3). Lay out ground sheet in the area you have chosen for
4). Open the package carefully and avoid using sharp knife or
5). Remove unit from storage bag spread it completely.
6). Install ground stakes around perimeter
7). Close zipper flaps on rear of unit to make sure it is closed
8). Connect blower to tube, making sure Velcro strap is firmly
9). Ensure the blowers will be connecting with the correct and
steady electric voltage to avoid blowers burn-out;
10). Blower systems require a 20 amp service each.
11). Spread the units especially the column to help inflation.
12). Secure all tethers after the unit is fully inflated.
13) Do a safety check of blowers, slide & climb covers.
14) Do not operate in winds over 20mph.