Custom Design Inflatable Paintball Barriers Airsoft Paintball
|Material||0.6mm PVC tarpaulin|
|Production Method||heat sealed|
CE pump(220-230 volts EU approved)
UL pump(110-130 volts UL approved)
1. air pump
2. Ground sheet (optional);
3. Detachable banners/LOGO (optional);
4. Ground anchors to fix the product;
6. Repair kit,
7. packing bag
2-year for inflatables,
1-year for blower/pump
How to use it
After inflating the paintball bunkers, you just fix them on the
ground (grass, snow, etc. ), field can be set up very easily and
quickly with just one or two people.It will be flexible for yout to
create your field by adding central bunkers such as Cylinders,
Tombstones, Snake, X
Make your own style
Several color option: Yellow / black, blue / yellow, yellow/red,
blue / red, red / black, black / green...
Size: Small, medium or big, according to your wonderful idea
How to Install and Setup Inflatables?
1).please check the working place is even and smooth.
2).Position on a level ground area.
3).Lay out ground sheet in the area you have chosen for
4).Open the package carefully and avoid using knife or blades.
5).Remove unit from storage bag spread it completely.
6). Install ground stakes around perimeter
7).Close zipper flaps on rear of unit to make sure it is closed and
8).Connect blower to tube, making sure strap is firmly secure.
9).Ensure the blowers will be connecting with the correct and
steady electric voltage to avoid blowers burn-out;
10).Blower systems require a 20 amp service each.
11).Spread the units especially the column to help inflation.
12). Secure all tethers after the unit is fully inflated.
13) Do a safety check of blowers, slide & climb covers.
14) Do not operate in winds over 20mph.